Cleaning and sanitizing surfaces are the most effective technique to eradicate bacteria and viruses to prevent illness in your space.
The 2 primary types of surfaces are soft and hard surfaces.
The capacity to use sanitizers on hard, nonporous surfaces is explicitly stated on most EPA-registered disinfectants. Many people are left wondering how to cleanse delicate surfaces. While some disinfectants guarantee to be safe for soft surfaces.
Disinfecting and sanitizing are 2 distinct processes. Sanitizing the item minimizes the number of germs and bacteria. Sanitizing kills 99.99 percent of germs, but the.01 percent that remains can leave multitudes of bacteria alive. Disinfecting kills or inactivates all of the germs and viruses, halting their growth.
How to Clean and Sanitize a Carpet?
Hot water carpet extraction is the most effective way of carpet cleaning.
However, not all carpets can withstand high temperatures. Regular carpet cleaning will be the next appropriate cleaning option.
To eliminate germs and dirt from the carpet, carpet extractors employ agitation.
To disinfect the space, you should first clean it. Using a vacuum is the initial step in carpet cleaning.
Step 1: Vacuuming
Vacuuming is the first step.
The most critical aspect of carpet care is vacuuming. Vacuuming on a regular basis eliminates dirt and debris from the ground. To collect soil, allergies, and germs, vacuuming should be done as regularly as possible.
HEPA filtering is among the most popular vacuum functions nowadays. The CRI Seal of Approval is by far the most significant accreditation to look for. CRI is a third-party clearance procedure that is completely independent. The Carpet & Rug Institute (CRI) gives a Seal of Approval (SOA).
Step 2: Use a carpet cleaner that is alkaline.
Use a pump-up spray bottle to spread carpet cleaner straight to the carpet after you use a vacuum.
The majority of dirt and detritus is acidic. Because dirt is tracked in on a person’s shoes from external sources, dirt is perhaps the most prevalent pollutant of carpets. In cleaning the carpet, you should have used an alkaline cleanser.
Do not use the carpet extractor with the cleaning solution. Only water and extraction rinsing should be kept in the extractor.
Step 3: Let it dwell
Allow the cleaner to remain on the carpet for the specified amount of time. Dwell time varies by the supplier; however, it usually ranges from 5 to 10 minutes.
Step 4: Rinse
Put the extraction rinse in the carpet extractor’s container after spraying the cleaning solution. As an acidic solution, extraction rinse will remove any detergent residue left.
To remove the soap and dirt from the carpet, use the carpet extractor.
The removal of as much water and soap residue as necessary is crucial to the carpet’s look. Any soap that remains on your carpet will draw dirt, leading it to get filthy.
Step 5: Let it Dry

Before stepping on the carpet, ensure it is entirely dry.
When a carpet is not allowed to dry entirely, it attracts dirt and becomes a breeding place for bacteria and mold.
Selecting a high-performing carpet extractor can boost filtration efficiency and yield better results. You should search for a CRI certified carpet extractor in the same way you should search for a CRI certified vacuum.
Conclusion
The greatest strategy to limit the number of bacteria in your carpet is to clean and sanitize it. The first stage is vacuuming, and the last and most efficient phase is extraction.